Visiting a showroom is all well and good, but does that really give you the confidence a machine is going to be fit for purpose in your business?

We’re not sure, so we’re inviting you to bring your sheet metal parts to try out the brand-new RAS Turbo 2 Plus folding machine.


A 4060mm upgrade to the RAS TURBO 2 Plus range

Until now, the RAS TURBO 2 Plus folding machine was available in lengths of 2540mm x 2.5mm and 3200 x 2mm. We are pleased to offer a brand new model with a bending length of 4060mm and a 1.5mm sheet steel capacity.

The TURBO 2 Plus is designed for a variety of uses when bending thin sheet metal. Equipped with a pointed or radius tool, it can bend profiles with ease. This addition to the lineup completes the RAS offering and ensures there is a TURBO 2 Plus for every sheet metal fabrication business.

Upper beam

The upper beam opens and closes with impressive speed. As the open and close position is programmable, you can create open or closed hems, thus making your parts unique and versatile. The upper beam shape offers large free space in front and behind of the beam.

  • Fast movements for closing/opening
  • Hemming: closed, open, tear-drop hems
  • Large free space in front of the upper beam (part design flexibility)
  • Rigid upper beam for straight bends
  • Servo drives and absolute encoders
  • Accurate positioning, no calibration

Folding beam

The folding beam on the TURBO2plus is an example of engineering superiority. Fast folding cycles lead to high productivity. An impressive plus is its ability to adjust the folding beam automatically to the actual material thicknesses.

  • Fast movement: short cycle times
  • Deep folding beam: excellent bend results
  • Adaptive: Automatic adjustment for material thickness
  • No downtime for machine adjustments
  • Long machine lifetime
  • New folding beam design for improved accuracy
  • Gentle and scratch-free bending of coated materials
  • Servo motors and absolute encoder: quick operation, no calibration

Lower clamping beam

The lower clamping beam is designed with a deep box configuration for maximum strength and resistance.

  • Precise and straight bends
  • Optimised crowning for improved accuracy
  • Long lifetime of the machine
  • Rigid unibody unit together with the side stands
  • Maximum resistance to deflection and torsion

Gauging system

The fingers of the gauging system position the workpiece for each bend. All stop fingers disappear below the table surface when the part has to be rotated on the sheet support table.

  • Fast positioning, repeatable accuracy
  • No 2nd operator (50% cost saving)
  • No marking (30% time saving)
  • Sheet support carries the weight of the blank
  • Solid front and rear stop fingers
  • Servo drive and absolute encoder: no calibration
  • Adaptive to working task and available floor space
  • Centre orientation for best bend results
  • Rectangular backgauge 6-1550 mm
  • T-gauging system for big parts (6-3050 mm)
  • Active squaring arm for narrow parts (lifting movement

Versatile tooling system

The three segment sharp tool can be taken on and off by a single operator in no time. The segmented goat’s foot tooling is precision designed, and literally “quick-clamps” and locks in position so that it is ready to work within seconds.

  • Large free spaces for part design flexibility
  • Segmented tools: Basic segments, adapter set, corner left/right
  • Automatic recognition of a tool change
  • Automatic recognition of the tool height
  • Different tool heights up to 127 mm
  • Short setup times due to quick locking mechanism
  • Folding beam tools for different thicknesses and Z bends
  • Segmented folding beam tools available
  • CrownTool with adjustable crowning
  • Lower beam tool with finger pockets

One-click part programming

Where experience and expertise were formerly required for programming, this intelligence is embedded in the machine software. Parts can be drawn on the touchscreen monitor or imported as STEP, DXF, or GEO files … and that is it! A simple mouse click is all that is required to program the complete setup and bend sequence automatically.

  • Simple creation of profiles and panels
  • Exact and error-free transfer of CAD data
  • Automatic programming of the bending process
  • No expert knowledge required
  • Software suggestion of the best folding sequence
  • 3D simulation of the bending process
  • Highest bending accuracy due to material tables
  • Loading individual programs or processing job lists
  • Online support via TeamViewer


Technical Specs

Technical Data TURBO2plus (mm)RAS 62.30-2RAS 62.25-2
Working length3200 mm2540 mm
Material thickness max (400 N/mm²)2.0 mm2.5 mm
Upper beam upstroke max280 mm280 mm
Gauging system (rectangular)6-1550 mm6-1550 mm
Gauging system (T-shape)6-3050 mm6-3050 mm
Auto material thickness adjustmentyesyes
Auto tool height recognitionyesyes
Machine dimensions (rectangular)4320 x 2600 mm3650 x 2600 mm
Machine dimensions (T-shape)4320 x 4000 mm3650 x 4000 mm


More Information

Want more information?

If you would like some more information about this product then please fill in the form and we will get back to you regarding your enquiry as soon as possible.

Rather talk to us directly? Then please feel free to call us on the number below.

01827 250000

Did you know…

You can part exchange your sheet metal and fabrication machinery. You’ll receive a competitive price for your existing machine which can be offset against your new investment.

Looking to cut costs?
Take a look at our Used Machinery!