Support system guides the duct through the DuctZipper

The support system with its three short and three long arms supports small and medium size air ducts ideally. The support system moves through the machine connected to the AutoPilot starting from the run-in to the run-out side.

  • The support system becomes a transport unit, if there are several seams on one duct
  • Ducts may return on the support system back to the entry side

AutoPilot ensures seaming quality

The AutoPilot clamps the blanks during the run through the DuctZipper

  • Seam starts on both blanks at the same time
  • Reliable 2-point clamping for every sheet thickness
  • 2 AutoPilot models: Standard and for Sliding seam/S-seam

Improved seaming accuracy

As the U-shaped rail at the run-in side has been extended up to the forming rolls the duct will be guided to the very end. This improves the seaming quality on the DuctZipper in L-shape especially at the outlet side of the duct, which also results in a reduced distortion of the duct cross-section.

Super tight air ducts

  • The SealJet additionally seals the seam joint during the run.
  • Easy, fast, efficient and clean sealing of the seam joint
  • Sensors starts and stop the injection process
  • No additional operation steps required
  • Recommended sealant: Mez-Bluemastic-Gel
  • A container (25 kg) sufficient for approx. 18,000 meters seaming length
  • Sealant is temperature resistant from -30°C to +160°C
  • Sealant provides corrosion protection (corrosion degree 0).
  • Sealant meets the latest hygiene requirements
  • SealJet can be retrofitted to existing machines

Technical Specs

RAS EasyFormer (mm)RAS 20.12RAS 20.10
Material thickness max1.0 – 1.25 mm0.5 – 1.0 mm
Duct dimension min140 x 140 mm00 x 100 mm
Speed approx15 m/min15 m/min

Videos

More Information

Want more information?

If you would like some more information about this product then please fill in the form and we will get back to you regarding your enquiry as soon as possible.

Rather talk to us directly? Then please feel free to call us on the number below.

01827 250000

Did you know…

You can part exchange your sheet metal and fabrication machinery. You’ll receive a competitive price for your existing machine which can be offset against your new investment.

Looking to cut costs?
Take a look at our Used Machinery!